PILOT H743
The H743 flight controller, built for serial production.
A robust STM32H743 flight controller on the standard 30.5 mm pattern. It drops into existing airframes and runs PX4, ArduPilot, INAV, or Betaflight - the stack your team already flies.
Manufactured in Germany. No Chinese components.
PROCESSOR
480 MHz Cortex-M7. 2 MB flash, 1 MB RAM.
FIRMWARE
4 stacks
PX4, ArduPilot, INAV and Betaflight.
SERVO OUTPUTS
13×
PWM and DSHOT.
SENSORS
Dual IMU
2× ICM-42688-P, DPS368 barometer.
BOARD FORMAT
36 × 36 mm
Standard 30.5 mm mounting pattern.
PLATFORM FIT
Built for production airframes
FORM FACTOR
36 × 36 mm
Standard 30.5 mm stack mounting. Drops into existing frames.
SERVO OUTPUTS
13× PWM / DSHOT
Multirotor, fixed-wing and VTOL configurations.
VIDEO
Analog FPV
Analog camera input and VTX output.
CONNECTIVITY
USB-C
8× UART, 2× I²C, CAN, SPI. No Ethernet, no onboard AI.
PROCESSOR
H743, not F722.
Many flight controllers in this class run on an STM32F722. We use the STM32H743: more than twice the clock speed and four times the memory, which leaves headroom for the full feature set of each firmware stack, logging and future updates.
Spec
STM32H743
STM32F722
Core
Cortex-M7, 480 MHz
Cortex-M7, 216 MHz
Flash
2 MB
512 KB
RAM
1 MB
256 KB
FIRMWARE & SOFTWARE
Four firmware stacks. Your choice.
Runs the flight stack your team already knows. No lock-in.
PX4
For autonomous missions and enterprise integration.
ArduPilot
Mature mission planning for multirotor, fixed-wing and VTOL.
INAV
GPS-assisted navigation for fixed-wing and long-range.
Betaflight
Responsive flight performance for FPV.
SUPPLY CHAIN
Manufactured in Germany. No Chinese components.
Designed and built in Germany for European and Ukrainian operators who need a supply chain they can rely on.
TECHNICAL DATASHEET
Specifications
Processor
STMicroelectronics STM32H743 (Cortex-M7, 480 MHz)
Sensors
Dual ICM-42688-P 6-axis IMU
DPS368 barometric pressure sensor
Magnetometer via external GNSS/compass module
Interfaces
13× servo outputs (PWM / DSHOT)
8× UART, 2× I²C, 1× CAN bus, 1× SPI
6× ADC (voltage / current sensing)
USB-C
RC input in SBUS and IBUS format, on UART6
Analog camera input and VTX output for FPV video
Micro SD card slot for blackbox logging
Mechanical & power
36 × 36 mm, standard 30.5 mm mounting pattern
Powered from USB or a 5 to 36 V battery
Supply rails: 4V5, 3V3, 5V, filtered battery (Vbt) and switchable (Vsw)
Firmware & software
Runs PX4, ArduPilot, INAV and Betaflight
Ground control: QGroundControl and Mission Planner supported
Compliance & availability
Manufactured in Germany. No Chinese components.
Price on request
Pilot or CoPilot?
Pilot for proven embedded flight control. CoPilot when you need onboard AI and a mission computer.
Pilot H743
CoPilot Nano
CoPilot Micro
Processor
STM32H743
NXP i.MX8M Plus
NXP i.MX8M Plus
Onboard AI
–
2.3 TOPS NPU
2.3 TOPS NPU
Format
36 × 36 mm
42 × 42 mm, 12 g
44 × 70 × 19 mm, 55 g
Servo outputs
13×
4×
16×
Video
Analog FPV
H.264 digital, 1× MIPI
H.264 digital, 2× MIPI
Firmware
PX4, ArduPilot, INAV, Betaflight
PX4
PX4
GET STARTED
Built to your platform.
Tell us about your airframe, harness and volumes. We adapt connectors and pinouts and deliver Pilot H743 assembly-ready. Price on request.
